Wagner HEA Control Pro 250M

West European countries mostly have quality paints that contain relatively few solids (chalk, lime). In East European countries paints contain more chalk, lime, etc. These solids cause clogging and so a filter is essential for this type of paint.

It sounds somewhat contradictory, but the newly designed tip, combined with reduced pressure means that the spray pattern is usually more attractive and gives better coverage than you can get with an airless sprayer. Please note that the quality of paint and spray technology will affect the spray pattern.

For a detailed explanation of the differences in technology, please see Airless vs HEA Here are the advantages and disadvantages of each technique: Airless versus other techniques: Suitable for larger projects Intensive use Less overspray Attractive spray pattern Needs more preparation and cleaning time Less forgiving (harder to use) Sustainable technology Is quite noisy HEA versus other techniques: Suitable for larger projects Moderately intensive use Less overspray Most attractive spray pattern Needs less preparation and cleaning time Forgiving (easier to use) Makes less noise HVLP versus other techniques: Suitable for smaller projects (except Wagner W950 for wall paint) Moderately intensive use Less overspray Least attractive spray pattern compared to HEA and Airless Needs less preparation and cleaning time Accommodating (easier to use) Less noisy

Wagner HEA Control Pro 250 M and R are both suitable for all types of lacquer, stain and latex (solvent or water-based) paints. Experience teaches us that Histor Monodek gives a less satisfactory result with HEA devices. In saying this we do not mean to disparage the quality of this type of latex, simply that using it in combination with HEA sprayers has proven not to be ideal. On the other hand, these sprayers cannot process textured paint, only smooth masonry.

These paint sprayers are suitable for the following types of paint:

• Varnishes and lacquers containing water and solvent.
• Lacquers, emulsions, solvents, resins, PVC lacquers (vinyl paints), primers, fillers and corrosion-resistant paints
• Dispersion and latex paints for indoors.

Yes, you can use a paint sprayer for both solvent and water-based paints.

In principle, lacquers, stains and latex/wall paint do not need thinning or only very light dilution. It's more important to use the correct tip for the paint you want to use. The right tip size can be found in the job description or technical worksheet issued by your paint manufacturer.

This paint spray is suitable for both the consumer and professional user. The machine lends itself well to painters working on small projects, such as boat and apartment owners, as well as for all other light professional uses.

NB: The guarantee only covers private use, not commercial use, because it is a do-it-yourself product based on our standards. One feature indicating this is the purchase by a private individual. Accordingly, when a business customer makes a purchase, we assume that a product will be used on a professional basis. The intended purpose is stated in the operating instructions. Our do-it-yourself devices are not suitable for professional use. If you use your device on a professional basis, you will no longer be entitled to the guarantee.

Spray pattern quality is the same for both the HEA Control Pro 250M and 350M. The hose of the HEA Control Pro 350 M is 15 meters long, compared to 9 meters for the HEA Control Pro 250 M. Spray output for the HEA Control Pro 350 M is 1.5 liters per minute and 1.25 liters per minute for the HEA Control Pro 250 M. Due to its greater capacity, the HEA Control Pro 350 M can handle fluids with more viscosity than the HEA Control Pro 250 M.

Cleaning any HEA device takes about 10-15 minutes. Use the primary reducer also for cleaning up (water, white spirits, lacquer thinner, xylene and denatured alcohol). Clean water-based paints with warm water. For solvent paints diluted with white spirits use the same product to clean up.

Although HEA paint sprayers produce relatively little overspray, you should always mask off anyway. Mask off the area you are spraying by 10-15 cm, and cover the floor and any furniture.

Paint sprayers always produce overspray! Even HEA devices that produce the least overspray. Wagner's videos do not exactly correspond to reality. As with conventional paints (applied with roller and brush), it is recommended to mask off past the area to be painted and cover the floor and furniture. It is also important to point the nozzle perpendicular to the wall at a distance of 20 cm for an even coverage. Keep this in mind and overspray won’t be a problem.

No, this package allows you to paint most types of wood, metal, wall and ceiling paints. It’s best to just get started and if it turns out that you need a different tip size, you can better estimate what size it should be.

This depends on the tip you choose. To calculate the width, multiply the first number of the tip size by 5. For example, a 519 tip covers a width of 25 cm (5x5 cm), while a 409 tip will cover 20 cm (5x4 cm). Note: This only applies if you hold the nozzle 15 cm from the wall.

Here we can answer with a positive yes! It produces better, more even coverage, giving a very professional finish. In addition, you need less paint. Wagner indicates that paint consumption can be reduced up to 30%.

That depends on the area you want to spray. Spray painting is much faster than roller painting, but preparation and cleaning take a bit longer. As a rule of thumb, we stick to a threshold of 60m2. If your project is bigger than that you will gain time. If certain areas are hard to paint, such as beams, corners, etc., you will also gain time.

Paint sprayers are easy to master. It is a fairly simple and handy way to apply paints, stains and lacquers provided you follow the instructions. Always read the manual and when in doubt call us before you get started.

Yes, the HEA Control Pro 250 M is delivered fully ready for painting lacquers, latex, stains, etc.

• 1x 2371053 Wagner HEA Control Pro 250M
• 1x 0418713 Filter L-XXL White (already installed in gun)
• 1x 0418711 Filter XS-S Red
• 1x 0517311 HEA Tip 311
• 1x 0517517 HEA Tip 517
• 1x 0517200 HEA tip holder
• 1x 0517801 HEA airless hose, 9 meter